Previous Thread
I installed the following 4GB RAM to my EX485. It works without problem.
http://www.newegg.com/Product/Product.aspx?Item=N82E16820231300&cm_re=g.skill...
Categories: Server Mods and Hacking
Does anyone know if the 485/7 will take a memory upgrade to 4GB DDR2 6400 NON-ECC 800Mhz ? I have already upgraded the CPU to an E5200 and it has been running fine for over a week now. The memory is kinda expensive and I wouldn';t want to buy iut only to find it doesn't work.
Tnx Tech
February 18, 2010 8:53 AM
February 18, 2010 9:47 PM
Since doing your 4gb memory upgrade, do you feel the system runs better? If so what does it do better?
EX487 e5200
February 19, 2010 9:00 AM
I believe 2GB is good for regular use. I upgraded to 4GB because of running a virtual machine on the server. I also upgraded my CPU to Celeron E3300 which has 2 cores and supports virtualization.
Jeffla said:
Since doing your 4gb memory upgrade, do you feel the system runs better? If so what does it do better?
I believe 2GB is good for regular use. I upgraded to 4GB because of running a virtual machine on the server. I also upgraded my CPU to Celeron E3300 which has 2 cores and supports virtualization.
Add Your Reply
Sponsored Links
Copyright © 2010
Capable Networks LLC.. All Rights Reserved.
RSS |
Privacy Policy |
Advertise With Us |
Terms of Use |
About Us |
Contact Us |
Site Map
Our Capable Community Network:
DVR playground |
Explore3DTV |
MediaSmart Home |
MotoDash |
My DigitalEntertainer |
My Open Router |
Pogoplugged |
Robo Community |
Sansa Community |
TechLore |
TiVo Community |
TouchSmartDevZone
This community site, MediaSmartHome.com (including its terms of use, privacy policy and content), is offered by and managed by Capable Networks LLC, not by Hewlett-Packard Company (HP). HP is not responsible for the performance of this community site or for any content posted on the site nor is HP liable for any damages or losses caused or alleged to have been caused by the use this Capable Networks community site.
