Can also repro the exact behaviour as above, blue screen at 79%.. Any solution to this?
Categories: Backup and Restore
Hi, I've got a MSS with two client computers, both running Vista. Everything has been working just fine for the last few months. I've installed the final PP1. Then last week I accidentally deleted a couple of music files. So I logged into the console, brought up the lastest backup and opened it. The progress bar made it to 79% and my computer blue screened and rebooted. Tried about 5 times, same thing every time. I know I've opened backups in the past but the last one may have been during the PP1 beta. My other computer experiences the exact same problem, open a backup and it will blue screen at 79%.
Anyone seen this before? Any chance this could have started with the final PP1? Or the HP 1.3 update? Or maybe it's a Vista problem? When's the last time YOU tried opening a backup?
I was hoping this was a limited problem but I've since found other people with similar blue screen problems when trying to open a backup.
P.S. - It's a stock MSS, no "upgrades." Only addins installed are AutoExit 2008 and Microsoft WHS Toolkit.
My MSS is not "stock" as I have 2GB, an LE-1640, 500GB System Drive, 2x1TB for data, a 500GB drive out of the pool for backup and a lot of Add-Ins.
I have NO problem getting past that 79%, although there is a significant "pause" in the progress at that point.
That said, I do NOT have any insight as to the problem. If you do not get a response here you might try over on http://www.mediasmartserver.net/forums/
...JohnBick
MSS: HP EX475 + two 1TB WD (3TB total), 2 GB mmry, LE-1640, APC UPS, PP1
PC1: Vista/32 Ultimate SP1 w/150 GB Raptor RAID-2 (C) & 320x4 GB RAID-5 data (D)
PC2: Laptop, Win XP Home SP3
Linksys WRT54G v1.1
For my particular situation, the problem went away by itself. I don't know if it was a single backup that was corrupt and was crashing the computers. But roughly two weeks later, I can open backups fine and I can't find the "problem" one.
I had your exact problem. I posted my problem on the Microsoft forums and got a quick response to my problem. It required a hotfix.....here's the answer that solved my problem:
Dieter Bohle said: I had your exact problem. I posted my problem on the Microsoft forums and got a quick response to my problem. It required a hotfix.....here's the answer that solved my problem:
Ahhhh.... No fix included in your post...
...JohnBick
MSS: HP EX475 + two 1TB WD (3TB total), 2 GB mmry, LE-1640, APC UPS, PP1
PC1: Vista/32 Ultimate SP1 w/150 GB Raptor RAID-2 (C) & 320x4 GB RAID-5 data (D)
PC2: Laptop, Win XP Home SP3
Linksys WRT54G v1.1


RSS

